FD-60DLLSC:Standard Specifications

1. Film Laminated film of all kinds
2. Roll size Maximum width: 1200 mm, Maximum diameter: 800 mm
3. Roll film unwinding unit Horizontal roll film shaft, Definitive tension control system with powder brake equipment
4. Control system  Numerical control system
5. Film feed mechanism Four AC servo motor drive system
*Equipment setting by touch panel. *Printing mark detection by mark sensor 
6. Heat sealer vertical 
movement mechanism
Single AC servo motor drive system(with functions for setting sealing time)
7. Heat sealers and 
cooling plates
Zipper/Bottom heat sealer Length 920mm(2)
Side heat sealer Length 920mm(2)
Bottom heat sealer Length 640mm(5)
Zipper/Bottm cooling plate Length 460mm(2) 
Side cooling plate Length 460mm(2)
Bottom cooling plate Length 640mm(2)
8. Pouch making data 
storage function
Sealing temperature, Pouch making speed, Sealing time, Sealing ratio, Film acceleration, others
9. Initial reject discard function To prevent confusion with badly sealed pouches on start up, film is discarded by double feeding for a selected distance after the cutter.
10. Pouch making capacity Maximum cycles: 240 CPM Maximum film speed:45m/min
*Cycles and film speed are calculated separately and  are not related
*Pouch making capacity depends on film material and thickness.
11. Power required
Standard Feed AC servo motor 4×1.5kw=6.0kw
Heat sealer AC servo motor 1×5.0kw=5.0kw
Dancer unwinding motor 1×0.75kw=0.75kw
Zipper and Bottom heat sealer 2×8.0kw=16.0kw
Side seal heat sealer 2×8.0kw=16.0kw
Bottom heat sealer 5×4.8kw=24.0kw
Control system and other 1.0kw
Total (200V/AC)68.75kw
Compressed air reguired : 0.6MPa(6kgf/cm2)
Cooling water reguired : About 20 L/min
12. Area for installation About 1.8m×19.0m  *Allow extra space for maintenance and operation
13. Optional equipment •Indexing conveyor •Powder shaker •Pouch eguipment (various)

* Due to equipment improvement, the above-mentioned figures and appearance may be changed without notice.

Contact Us

Options, in addition to those mentioned above, can be designed and manufactured to suit customer needs. Please consult us without obligation.

If you would like more information about us or any inquiries, please contact in the form.