 |
| Cutter control system |
Applies to : BH-60HV Series, BH-120V, FD-35V, FA-35V
Applicable film : Laminating film of all kinds * |
|
The double cut system described below eliminates burrs
on the in-line corner cut unit, is a measure against product iability and significantly improves the value of the merchandise. |
|
 |
|
A high precision CCD camera directly over the cutter observes the shape of the corner cut and the image is analyzed by computer. (It handles corner cuts of any shape.) Even if the location of the corner cut punched hole is altered by a change in printing pitch, the software controls the shear cutter so the cut is in the center of the punched hole (for single cut). An AC servo motor drives the cutter unit for more precise positioning control. |
| The following two types of bag making may be selected: |
|
| Single cut system |
| Only one cut is made accurately (through the center of the punched hole) on the diagonal line of the corner cutter blade. |
| Double cut system |
| After making a shear cut with the front of the star-shaped acute-angled part of the corner cutter, the shear cutter base, with the star-shaped acute-angled part inserted, is moved upstream about 0.6 mm where a second shear cut is made. (This movement can be set between 0.6 and 1.5 mm.) |
| * Very rarely there is film which can not be image processed. Also, control is not possible if there is a printed pattern over a transparent film seal and the image contrast is not clear. |
| In addition to corner sutting, it also does the following |
|
Notch blade
 A small triangular blade for notching one side in transverse bag making |
Single cut control
Single cut enables notching can be positioned just inside of cutting, thus tearing duaring transportation and injury by the notch edge is avoided.
 |
Double cut control
Double cut enables previously impossible single side notching.
 |
 |
|
| Options addition to those mentioned above can be designed and manufactured to suit customer needs. Please consult us without obligation. e-mail: 2007gad@totani.co.jp |
|
|
Corporate Profile | Product Information | Totani News | Exhibition | World Wide Locations | Contact Us
|
|
|
|
Go back to Main Products Line 