New Products

Products Information

Model ST-24<Options>
Function Spout inserter
ST-24

ST-24 : Outline

ST-24 : Product Features

ST-24 has a capability to mount a plastic molded spout at a maximum speed of 70CPM - the world's highest speed.

The maximum cycle per minute described is verified under the certain conditions.
Actual production speed may vary depending upon materials and others.
Please consult with sales dept. for further information.

Take a look at video!

[ST-24] ST-24 Spout inserter
ST-24

model [ST-24]
70CPM: Spout inserter
TOTANI has enhanced critical features on the spout inserter, model[ST-24].

Sample Products

ST-24

Bags for detergent refills, etc.

Standard Specifications

Bag Making Sizes & Shapes <Spout installation position and Pouch size range>

ST-24

At a 45 degrees angle on pouch corner.
(Optionally, it can also attach spouts at the center of the pouch mouth.
Top seal length: 120mm)

  • W (Pouch width) : 80 to 300mm
  • L (Pouch height) : 150 to 350mm
  • T (Top seal length) : 120mm

* When the pouch width is 210 to 240mm, it is required to use the following equation : ≦560-W

* The portion which cannot be sealed by top sealing in the process of vertical installation must be sealed in advance, at the time of pouch making.

Standard Specifications

Spout sealing capacity [Record]
PE : 70 pieces/min (Pouch composition: PET12/LLDPE130)
PP : 47 pieces/min (Pouch composition:PET12/NY15/CPP80) *
Requirement
  • Power supply : 3-phase 200 VAC, Approx. 4.7kw, Approx. 6.8KVA
  • Compressed air : 0.6MPa (6 kgf/cm2), Approx.
    700L/min. (ANR) (Requires a separate air compressor of 7.5kw [10 HP] or more.)
  • Cooling water : Approx. 15L/min.
Required floor space About 3.04 x 4.21, m
* Allow extra space for maintenance and operating.
Standard equipment
  • Spout feeder (With 100L hopper)
  • Pauch infeed conveyor
  • Printer
  • Spout bag unloading conveyor (Standard machine length : 2m)
* All specifications are not guaranteed because the installation capacity depends on the material, shape and thickness of film and spout.
** Options in addition to those mentioned above can be designed and manufactured to suit customer needs. Please consult us without obligation.

* Due to equipment improvement, the above-mentioned figures and appearance may be changed without notice.

Page Top