New Products

Products Information

Model BH-60DLLS<Three-Side-Seal Series>
Function High-speed, three-side-seal, automatic pouch making machine [ with stand-up pouch unit ]
BH-60DLLS

BH-60DLLS : Outline

BH-60DLLS : Product Features

With three servos *1, the "Sealing time" setting *2 allows the operator to set the dwell time independently from the film draw speed to provide the sealing time necessary for standing pouch making at an outstanding high-speed of 240 CPM.(Can be made at 300 CPM by Option)

Capabilities of up to 4-lane pouch making for Three-Side-Seal pouches can produce up to 960 pouches/minute. 2-lane Stand-Up pouch making can produce up to 480 pouches/minute.

Standard easy job set up features are all incorporated, such as easy access to any function, auto photo-eye set up, job data storage system, faulty pouch rejection system, wait time feature to reduce loss of film, splice rejection system, and more.

The maximum cycle per minute described is verified under the certain conditions.
Actual production speed may vary depending upon materials and others.
Please consult with sales dept. for further information.

Sample Products

BH-60DLLS

Pouches for detergent refills and retort foods, etc.

Options

Standard Specifications

Bag Making Sizes & Shapes

BH-60DLLS

Standing Pouch 2-line bag making  (1-line bag making is also possible)

  • W (Bag width) : 60 mm to 250 mm *1
  • L (Bag length) :
    120 to 270 (2-line bag making)
    240 to 540 (1-line bag making)
  • G (Bottom gusset depth) : 20 to 45 mm (70 mm) *2
  • A (Bottom punch diameter [Standard]) : 15 mm *3

*1. Maximum bag length is controlled by equipment fitted to cross heat-sealer unit and effective length of cross heat-sealer unit. Therefore, the maximum bag widths shown above are not the bag making capacity with full equipment.

*2. For bottom gusset depth over 45 mm the wide longitudinal heat-sealer (90 mm wide) is required. With the 60 mm wide longitudinal heat-sealer the normal maximum bottom gusset depth is about 45 mm.

*3. Bottom punch equipment with a hole pitch of 30 mm can be used as 2-hole bottom punch equipment.

** See "BH-60D"-Bag Making Sizes & Shapes- for three-side-seal bag making.

Standard Specifications

Film Laminated film of all kinds
Roll size Body material /
Maximum width : 1160 mm,
Maximum diameter : 800 mm (3-inch paper core)
Bottom material /
Maximum width : 150 mm,
Maximum diameter : 600 mm (3-inch paper core)
(2-shaft, horizontal roll film axial type)
Weight : 35 kgf *1
Roll film unwinding unit Body material /
Horizontal shaft, V plate system,
Definitive tension control system, powder brake equipment
Bottom material /
Horizontal shaft, Triangular plate system, Definitive tension control system, powder brake equipment
Control system Numerical control system
Film feed mechanism Dual AC servo motor drive system
(Optional extra servo available) *2
Heat-sealer vertical
movement mechanism		 Single AC servo motor drive system
(With functions for setting sealing time)
Bag making data
storage function		 Sealing temperature, Bag making speed,
Sealing time, Sealing ratio,
Film acceleration, other
Bag making capacity <For standing pouch bag making>
Maximum number of shots : 200 shots/min
Maximum film speed : 30 m/min
(*Slow start mechanism is used in some cases)
<For three-side-seal bag making only>
Maximum number of shots : 300 CPM (Can be made at 300CPM by Option)
Maximum film speed : 45 m/min for film roll diameters 800 mm to 600 mm,
60 m/min for smaller diameters *3
(*Slow start mechanism is used in some cases)
Area for installation, Weight About 2.40 x 8.47 m *4 / About 5,600 kg
Optional equipment
  • Bottom roll film racking unit for 300 mm wide bottom material (Bottom material/maximum width: 300 mm, maximum diameter: 600 mm* bag gusset depth limited by width of longitudinal heat-sealer.)
  • Bottom material automatic joining equipment
  • Bottom material single shaft type standing pouch unit
# For others, see "BH-60D"-Standerd specifications-
* Slow start mechanism is to adjust to the set operation speed from the machine start gradually in a few seconds.
*1 "BH-60D"-Standerd specifications for roll film dimensions for three-side-seal bag making.
*2 Equipment settings by display and simple keyboard entry.
Printing mark detection by mark sensor.
*3 Bag making capacity depends on film material and thickness. Number of shots and film speed are calculated separately and are not related.
*4 Allow extra space for maintenance and operating.
** The options mentioned above are sold separately and not included as standard equipment.
** Options in addition to those mentioned above can be designed and manufactured to suit customer needs. Please consult us without obligation.

* Due to equipment improvement, the above-mentioned figures and appearance may be changed without notice.

Page Top